Water spray sterilization kettle

Description

Product Introduction
Operating principle of water spray sterilizer
Put the product basket into the sterilization kettle and close the kettle door. Then the kettle door is ensured by triple safety interlock. The doors are mechanically locked throughout the sterilization process.
The sterilization process is automatically performed according to the recipe input to the microprocessor controller PLC.
Keep an appropriate amount of water at the bottom of the autoclave. If required, this water can be automatically injected at the beginning of the temperature rise. For hot filled products, this part of water can be preheated in the hot water tank and then injected. During the whole sterilization process, this part of water flows through the water distribution pipes and nozzles distributed in the kettle repeatedly to spray the water in the form of vapor mist and uniformly distribute in the kettle to heat the products. This ensures a uniform heat distribution.
For the tubular heat exchanger configured for the sterilization kettle, the process water in the kettle passes through one side and the steam and cooling water passes through the other side during the heating and cooling stages, so that the sterilized product will not be directly contacted with the steam and cooling water, achieving aseptic heating and cooling.
During the whole process, the pressure inside the sterilization kettle is controlled by the program through the automatic valve to feed or discharge the compressed air from the sterilization kettle. Due to the water spray sterilization, the pressure in the kettle is not affected by the temperature, so the pressure can be set freely according to the packaging of different products, making the equipment more widely used (three-piece can, two-piece can, flexible packaging bag, glass bottle, plastic packaging, etc. adapt at the same time).
When sterilization is finished, an alarm signal will be given. At this time, open the door and discharge. The next batch is then ready for sterilization.
The temperature distribution uniformity in the kettle body is+/- 0.5 ℃, and the pressure is controlled at 0.05Bar.
Benefits of Water Spray Sterilizer
Precise temperature control, excellent heat distribution
The temperature control system researched and developed by our company can reach up to 12 sections of temperature control. Step and linearity can be selected according to different product and process formula heating modes, so as to achieve the best repeatability and stability among batch products, and the temperature can be controlled within ± 0.5 ℃.
Perfect pressure control for a variety of packaging forms
The pressure of the pressure control system researched and developed by our company is constantly adjusted in the whole production process to adapt to the change of the internal pressure of the product packaging, so as to minimize the deformation of the product packaging. No matter the rigid container of the iron tank and aluminum tank or the plastic container of the plastic bottle or the flexible container such as the gas-containing flexible packaging, the pressure can be controlled at ± 0.05Bar
Product packaging with high cleanliness
Indirect heating and cooling by the heat exchanger make the steam and cooling water not contact with the process water, the impurities in the steam and cooling water will not be brought to the sterilization kettle, the secondary pollution of the product is avoided, the water treatment chemical agent is not required (no chlorination is required), and the service life of the heat exchanger is also greatly extended.
Comply with FDA/USD certification
We are an experienced thermal verification expert, a member of IFTPS in the United States, fully cooperating with FDA approved third-party thermal verification agencies, and our experience with many clients in North America has made us familiar with FDA/USD regulatory requirements and state-of-the-art sterilization technologies.
Energy conservation and environmental protection
>A small amount of process water is quickly recycled to quickly reach the predetermined sterilization temperature.
>Low noise creates a quiet and comfortable working environment.
>Different from the pure steam sterilization method, there is no need to exhaust before the sterilization before heating, thus greatly saving the steam loss and saving about 30% of the steam.
Keywords: Water spray sterilizing kettle Full spray sterilizing kettle Spray sterilizing kettle

Product parameters

＞1200mm
＞1400mm
＞1600mm
＞1800mm
Sizes above can accommodate 2-6 baskets

Type of Package
Iron tank
Aluminum tank and aluminum bottle
Plastic bottles, cups, boxes, trays
Glass bottles and cans
Flexible packaging bag
Tying casing packaging
Tetra Recart
Field of adaptability
Drinks (Vegetable protein, tea, coffee)
Dairy products
Vegetables and fruits (mushroom, vegetables, beans)
Meat and poultry
Fish and seafood
Infant food
Instant meals
Pet food